You will need
3M of Lining Fabric
Tape Measure
22in Zipper
Scissors
Chalk
Pins
Zipper Foot
Sewing Machine
Iron
Sewing Needles
Polystyrene Beads
Step 1
Cut out two 45x35in pieces of your lining fabric, pin together all but one of the short edges and sew along the pinned edges.
Step 2
Take the open short side, match up the two long steams and pin this together to hold in place, ready to sew. After, sew along the pinned edge, leaving a small gap in the middle and turn right sides out and fill the beanbag with polystyrene beads. Afterwards, pin the small gap and sew it shut.
Step 3
Cut out two 45x35in pieces of each of the main fabrics and with the right sides facing, pin together the long edges. Then, sew along both the pinned long edges, leaving the ends open.
Step 4
Lay the zipper face down and open on one side before pinning it in place. Afterwards, sew along the pinned edge to hold the zipper in place and then line the zipper up with the other side and pin in place.
Step 5
Sew along the pinned edge to hold the zipper in place and then pin shut the open edges next to the zipper and sew along them.
Step 6
With the right sides out, fold the fabric over slightly and press. Pin the fabric in place and then sew to top stich the zip.
Step 9
With the right sides in, match the two long seams of the open side, pin in place and sew along the pinned side.
Step 10
Turn the right sides and slide the filled inner inside to finish.
Finish
You now have a completed bean bag, designed for indoor and outdoor – ready to be placed anywhere around your home!
